FLEX-3000/1500 RJ-45 Mic to W2IHY Audio Interface Configuration


FLEX-3000/1500 RJ-45 Mic to W2IHY Audio Interface Configuration

System Dependencies
Minimum PowerSDR Version:   N/A
Applicable Hardware:   FLEX-3000 & FLEX-1500 

Content provided by: FlexRadio Systems Engineering

The following wiring diagram represents how to wire the modular FLEX-3000 & FLEX-1500 RJ-45 8-pin microphone connector to the W2IHY EQplus and the 8-Band EQ using the 5-pin DIN connector.




NOTE:  Connect the GROUND (GND) to the cable shield but do not connect it to the shield of the DIN connector

FLEX-3000/1500 Microphone Pinout Configuration
Pin Number
Function
1 Not Used - Reserved for future use
2 Not Used - Reserved for future use
3 Vcc (+5 VDC)
4 Microphone Ground (mic -)
5 Microphone In (mic +)
6 PTT (PTT +)
7 PTT Ground (PTT -)
8 Not Used - Reserved for future use


This KB article may reference additional files that are available on the FlexRadio Systems web site Downloads page. Please use the URL(s) below to download the referenced materials.

An Adobe Acrobat Reader may be required to open the file. You can download Adobe Acrobat from here.

KB Source Document(s):

None Referenced


Posted Saturday, March 14, 2009 by Administrator
http://kc.flexradio.com/KnowledgebaseArticle50404.aspx